Henna Extract: Can it be an Alternative Retanning Agent?
Main Article Content
Abstract
Extract from the leaves of lawsonia inermis (henna), widely distributed in Sudan has been evaluated for its utilization in the retanning of the leather and presented in this paper. Leaves of henna have been extracted for 1 hour with distilled water (1:10 w/v) at temperature above 80 oC. The henna extract prepared has been used for the retanning of wet blue leathers. The effectiveness of henna extract in retanning of wet blue leathers has been compared with wattle retanning. The organoleptic properties of the leathers viz. softness, fullness, grain smoothness, grain tightness (break), general appearance, uniformity of dyeing of henna retanned leather have been evaluated in comparison with wattle retanned leathers. Henna retanning resulted in leathers with good grain tightness. Dyeing characteristics of henna retanned leathers have been found to be better than wattle retanned leathers. Also physical strength characteristic and shrinkage temperature and economic viability were noted. The effluent arising from this retanning system has been analyzed for its environmental impact.RESUMEN: Extractos de las hojas de lawsonia inermes (alheña), por doquier distribuidas en El Sudán, se han evaluado para su utilización en el recurtido del cuero y presentado en esta publicación. Hojas de alheña fueron tratadas por una hora con agua destilada (1/10 peso/volumen) a una temperatura superior a 80?C. El extracto de alheña así preparado se ha utilizado para recurtir cueros curtidos al cromo. La efectividad el extracto de alheña es comparable con recurtidos con mimosa. Las propiedades de toque de mano, v. y g. Blandura, llenura, finura de flor, firmeza de flor (quiebre), apariencia general, uniformidad del teñido de cuero recurtido por alheña han sido evaluadas en comparación con cueros recurtidos con mimosa. También las características de resistencia física y temperatura de contracción y viabilidad económica fueron examinadas. El efluente resultante de este sistema de recurtido ha sido analizado por su impacto medioambiental.
Article Details
Section
Articles