Effect of Retanning Agents on Dry Heat Resistance of Leathers

Main Article Content

Chao Wu
Yunhang Zeng
Xueping Liao
Wenhua Zhang
Bi Shi

Abstract

To obtain acceptable dry heat resistance of leather by using proper retanning agents, the effect of typical retanning agents on dry heat resistance was investigated. The results indicated that the leathers retanned by different retanning agents have varying dry heat resistance, and the dry heat resistance is not always positively correlated with hydrothermal stability. Heating leather at 150oC for 30 min in the dry state led to minor damage to the crosslinking of collagen fibers, such as destruction of hydrogen bonds or other weak crosslinks. The increase of water content in leather exhibits negative effect on the dry heat resistance. Therefore, it was observed that the retanning agent that has lower hydrophility lead to higher dry heat resistance of leather. In addition, it seems that the retanning agents with good filling property and thermal stability are effective in achieving high dry heat resistance of leather. ResumenPara obtener una aceptable resistencia al calor seco en el cuero mediante el uso de agentes de recurtición adecuados, el efecto sobre la resistencia al calor de los típicos agentes de recurtición fue investigado. Los resultados indicaron que los cueros recurtidos por diferentes agentes de recurtición han variando la resistencia al calor seco, y la resistencia al calor seco no está siempre correlacionada positivamente con la estabilidad hidrotermal. Calentar el cuero a 150ºC durante 30 min en estado seco conduce a daños menores en la reticulación de las fibras de colágeno, tales como la destrucción de los enlaces de hidrógeno u otras reticulaciones débiles. El aumento del contenido de agua en el cuero exhibe efecto negativo en la resistencia al calor seco. Por lo tanto, se observó que el agente de recurtido que tiene menor hidrofilia conduce a una mayor resistencia al calor seco en el cuero. Además, parece ser que los agentes de recurtido con buenas propiedades de llenado y estabilidad térmica son eficaces en el logro de alta resistencia al calor seco del cuero.

Article Details

Section
Articles